Chinese module manufacturer Longi says its Hi-MO 9 series with HPBC 2.0 cells achieved watt-for-watt power gains of 1.21% to 3.92% in real-world tests across multiple countries and climates, lowering the levelized cost of electricity (LCOE) compared with mainstream tunnel-oxide passivated contact (TOPCon) modules.
Chinese module manufacturer Longi has published field data from a series of tests on its Hi-MO 9 module series. The flagship product of Longi’s back-contact (BC) series, unveiled earlier this year, the Hi-MO 9 module is built on the company’s HPBC 2.0 high-efficiency cell technology.
The testing scenarios covered environments including temperate continental, tropical, arid regions and high-humidity coastlines to evaluate the modules performance under real-world operating conditions. Longi said the findings demonstrate its Hi-MO 9 module “exhibits stability and consistency exceeding expectations in actual power generation performance, system economic benefits and environmental adaptability”.
The BC modules achieved stable growth in watt-for-watt power generation worldwide, with gain margins ranging between 1.21% and 3.92% when compared to mainstream TOPCon modules.
At an assessment conducted by Enertis Applus+ at a 47 MW single-axis tracker project in Seville, Spain, the Hi-MO 9 achieved 2,209 equivalent full-load hours in its first operational year, with watt-for-watt power generation 2.4% to 3.4% higher than TOPCon modules at the same site. Calculations indicated the LCOE was reduced by 3.92% and 4.47% when compared with mainstream TOPCon-210R and TOPCon-210 models.
Elsewhere, evaluation projects led by IPVF on two 50 MW ground-mounted projects in France and Denmark highlighted the Hi-MO 9’s watt-for-watt power generation was on average 1.84% higher than that of TOPCon modules, while the LCOE was 3.32% and 2.43% lower than that of TOPCon-210R and TOPCon-210 models.
In the high-temperature, high-humidity city of Sanya, southern China, an assessment by the China General Certification Center found the Hi-MO 9 achieved a 1.54% watt-for-watt power generation gain over TOPCon modules. The module’s backsheet also had a 1.21 C lower operating temperature and a 0.19% advantage in power degradation rate over six months.
Meanwhile at a flat test site in the eastern Chinese province of Zhejiang, the Hi-MO 9 modules power generation gain reached 1.87%, with temperature and degradation rate advantages of 1.26 C and 0.38%.
Longi added that field data has also highlighted that under common partial shading conditions caused by vegetation, bird droppings, dust or structural shadows, the Hi-MO 9 is capable of effectively suppressing the hot spot effect, with hot spot temperatures significantly lower than those of conventional modules. It says this breakthrough “elevates PV plant safety to a new level”, mitigating risks of material aging, power degradation and potential fire hazards.
The company said that the publication of its field testing program “marks a significant milestone in the further large-scale application of BC technology”.
Longi’s latest release follows case study data shared to the German market in October which found BC modules outperform TOPCon on generation and cost.
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.
Popular content
Source link