A home battery backup system stores electricity from your solar panels or the grid and powers your home when the grid goes down or electricity prices peak. In 2026, residential battery installations carry a median price of $1,130 per kilowatt-hour, the battery attachment rate on new solar systems sits at 31% nationally and 58% in California, and the three brands that dominate installations are Tesla, Enphase, and Franklin WH.
How does a home battery backup system work?
A battery backup system sits between your solar panels and your electrical panel. During the day, your solar panels produce electricity. The battery stores any production your home does not use immediately. In the evening, when your panels stop producing and utility rates peak, the battery discharges to power your home.
During a grid outage, the battery disconnects your home from the utility grid (a process called islanding) and runs your home on stored solar energy. If the outage extends into the next day, your solar panels recharge the battery, and the cycle continues.
What components make up a battery backup system?
How do you size a battery for your home?
Sizing depends on two questions: what do you want to back up, and for how long?
With solar panels recharging the battery each morning, even the essentials-only setup can sustain a home through multi-day outages. The October 2026 PG&E PSPS lasted three days, and homes with solar-plus-battery ran through it without interruption.
What are the leading battery brands in 2026?
Tesla dominates residential storage sales at roughly 70% market share, followed by Enphase at 15% and Lunar Energy at 5%. The remaining 10% splits among Franklin WH, SonnenCore, Generac PWRcell, and others. Tesla’s share reflects both pricing and the brand’s consumer awareness. Enphase benefits from compatibility with its microinverter platform, which powers the majority of new residential solar installations.
How does a battery change the economics of solar in California?
Under NEM 3.0, exporting solar electricity to the grid earns 3.7 to 4.6 cents per kWh. Buying that electricity back from SDG&E costs up to 45.5 cents per kWh. The ten-to-one gap between export and retail rates means every kilowatt-hour you store and use yourself saves roughly ten times more than one you send to the grid. A battery captures that gap.
Do I need solar panels to install a battery?
No. A battery can charge from the grid during off-peak hours and discharge during peak hours to reduce your bill. But the savings are significantly larger when paired with solar, especially under NEM 3.0 in California.
How long do home batteries last?
Most residential batteries carry 10- to 15-year warranties and are rated for thousands of charge cycles. LFP (lithium iron phosphate) chemistry, used in most 2026 models, degrades more slowly than older lithium-ion chemistries.
Will a battery eliminate my electric bill?
A correctly sized solar-plus-battery system can reduce your bill to the minimum connection charge ($24.15/month for PG&E non-CARE customers as of March 2026). It will not eliminate the connection fee itself.
Citations
Median battery price of $1,130/kWh from EnergySage H1 2026 Pricing Report
Battery attachment rates (31% national, 58% CA) from SEIA Q3 2026 Solar Market Insight
Market share data from Ohm Analytics September 2026 Flash Report
PG&E fixed charge of $24.15/mo from PG&E residential rate schedule, effective March 2026
System sizing and duration estimates based on SolarTech project data
Take the Next Step with SolarTech Energy Systems
SolarTech Energy Systems designs and installs home battery backup systems across California and Arizona. Tell us about your home, and we will recommend a battery size, show you the installed cost, and model your monthly savings. Call (858) 261-5642.