Shopping for a home battery usually starts with the wrong question: “How big should it be?” The right question is smaller and more useful: “What do I actually want to keep running when the grid goes down, and for how long?” Answer that, and the size mostly picks itself.
This guide walks through the sizing math in plain English, with worked examples you can adapt to your own home. If you want a price for a system sized to your loads, get a solar quote — an installer will confirm the numbers against your panel, your wiring, and your utility’s rules.
Start with what you want to keep running
Most homeowners do not need to back up everything. They need to back up the things that matter during an outage: the fridge, lights, Wi-Fi, phones, and maybe a medical device, a well pump, or a single room of air conditioning. Installers call these critical loads, and they usually live on a separate backup panel so the battery feeds them first.
Write your own list before you shop. A typical essentials list looks like this:
- Refrigerator — the single most common critical load.
- Lights — LED lighting uses very little power.
- Wi-Fi router and modem — small draw, big quality-of-life value.
- Phones, laptops, and a CPAP or other small medical device.
- Well pump or sump pump — if you have one, it is usually non-negotiable.
- One room of cooling or heating — a window unit or mini-split, not necessarily the whole central system.
What you leave off the list matters as much as what is on it. An electric range, an electric dryer, and an EV charger are the loads that turn a modest battery into a very large one. You can always run those from the grid when power returns; backing them up through an outage is a choice, and an expensive one.
The two numbers that matter: kWh and kW
Battery specs come down to two numbers, and confusing them is the most common sizing mistake.
- Energy (kWh) — how much electricity the battery holds. This decides how long things run.
- Power (kW) — how much electricity it can deliver at once. This decides how many things can run at the same time.
Think of it as a water tank and a pipe. The tank (kWh) is how much water you have. The pipe (kW) is how fast it can flow out. A big tank with a narrow pipe runs a few things for a long time. A small tank with a wide pipe runs many things briefly.
Two more spec-sheet terms to know:
- Usable capacity vs. nameplate capacity. A battery’s nameplate is its total storage; usable capacity is the share you can actually draw. Most modern lithium home batteries let you use 80–90% of nameplate (the rest is held back to protect the cells). Shop by the usable number — it is the one that determines runtime.
- Round-trip efficiency. Converting power into the battery and back out loses some energy, typically around a tenth. That is another reason to size with margin rather than to the exact kilowatt-hour.
Do the math: daily critical kWh times days of backup
The sizing formula is simple once you have your list:
Usable battery size (kWh) = daily critical-load energy (kWh) × days of backup you want.
To estimate daily energy for a load, multiply its running watts by the hours it runs, then divide by 1,000. A refrigerator that averages 100 watts over 24 hours uses about 2.4 kWh a day. LED lights, a router, and phone charging together often add less than 1 kWh a day. Your utility bill shows total household use, but it will not split out critical loads — a plug-in meter on individual devices, or an installer’s load audit, gives the real numbers.
Illustrative example — essentials only. Suppose your list is a fridge (about 2 kWh a day), lights, Wi-Fi, and device charging (about 1 kWh a day combined), plus a small medical device. That is roughly 3–4 kWh a day of critical loads. For one day of backup, a single 5 kWh usable battery covers it with room to spare. For two days, you are looking at roughly 10 kWh usable. These are examples, not guarantees — your fridge, your usage, and your climate will move the numbers.
Illustrative example — essentials plus cooling. Add a window air conditioner or mini-split running part of the day, and daily critical energy can climb to roughly 10–12 kWh. That is about a day of backup from one standard 13.5 kWh usable unit, and less if the cooling runs all day. This is why air conditioning is the load that most often pushes a system from one battery to two.
Illustrative example — whole-home backup. The average American home uses roughly 30 kWh a day across everything. Backing up the whole house for a full day therefore takes roughly 20–30 kWh of usable storage or more — two or more standard units — and multi-day whole-home backup quickly becomes a very large, very expensive system. Most homes that want whole-home coverage use load management instead: the system automatically sheds big loads to stretch the battery, or the homeowner accepts that backup means essentials, not everything.
Watch the startup surge
Energy (kWh) decides runtime, but power (kW) decides whether a motor will start at all. Motors draw a brief surge when they switch on — often two to three times their running power. A well pump that runs at about 1 kW can briefly demand 2–3 kW at startup. A central air conditioner compressor is worse.
This is why a battery with plenty of energy can still fail to run your well pump: its continuous power rating, and its short peak rating, must clear the biggest startup surge on your backup panel. Check the spec sheet’s continuous and peak power, and have your installer verify the locked-rotor (startup) draw of your largest motor loads. If the surge is too big, the options are a higher-power battery, a soft starter on the motor, or leaving that load off the backup panel.
What batteries are actually on the market
Most residential batteries today fall in a fairly narrow band. Typical current models, from manufacturer spec sheets:
- Tesla Powerwall 3 — 13.5 kWh usable, 11.5 kW continuous power. Its high power output is what lets a single unit run larger loads, including air conditioning.
- FranklinWH aPower 2 — 15 kWh usable, 10 kW continuous power, stackable to much larger systems.
- Enphase IQ Battery 5P — 5.0 kWh usable, 3.84 kW continuous power per unit, designed to be stacked in 5 kWh steps.
- Generac PWRcell 2 — modular from 9 to 18 kWh usable per cabinet (up to 36 kWh paired), with 5.2 to 11.5 kW continuous power depending on configuration.
Two patterns are worth noticing. First, most single units cluster around 10–15 kWh usable — that is the industry’s answer to “one day of essentials, or part of a day of whole-home.” Second, modular systems (Enphase, Generac) let you start small and add capacity later, which is the honest answer to uncertainty about your needs. Specs change between model years, so confirm the current datasheet before you buy.
Sizing for backup is not the same as sizing for daily use
A battery can do two different jobs, and they size differently:
- Outage backup: the battery sits mostly full, waiting for an outage. Size it to your critical loads and the outage length you want to ride through, as in the examples above.
- Daily self-consumption or time-of-use shifting: the battery charges from solar during the day and discharges every evening, or discharges during expensive peak hours. Here the right size depends on how much solar you export and when your utility’s rates peak — a bigger battery only helps if there is surplus solar to fill it and expensive evening power to displace.
Many systems do both, but the backup requirement should set the floor. A battery sized only for evening self-consumption may be too small for the outage you actually bought it for. And remember that a battery is only a backup if it is backup-capable: some storage systems are designed for self-consumption only and cannot power your home during an outage. Confirm backup capability explicitly before you buy. Your electric utility’s interconnection and backup rules also affect what you can install and how it must be wired.
How solar and battery work together
A battery does not generate power — it stores it. Paired with rooftop solar, it stores daytime surplus for the evening and, during an outage, recharges from your panels each day the sun shines. That daily recharge is what turns a one-day battery into multi-day resilience, as long as the outage does not coincide with days of heavy cloud.
One fact surprises many homeowners: standard grid-tied solar panels shut off during an outage for safety, so solar alone does not keep your lights on. The battery, plus the backup gateway or hybrid inverter that disconnects your home from the grid, is what makes outage power possible. If you do not have a roof to work with, plug-in solar kits are a separate, much smaller option — they are not a substitute for a home battery system.
Why oversizing wastes money
It is tempting to buy the biggest battery “just in case.” Three reasons not to:
- Unused capacity earns nothing. A battery sized for a three-day outage that never comes still cost you the price of those extra kilowatt-hours.
- Batteries age with time as well as use. Capacity fades over the years regardless, so capacity you rarely touch still degrades.
- Daily-use value caps out. Once the battery is big enough to store your evening usage, extra capacity has no surplus solar to fill and no evening load to serve.
The better hedge against uncertainty is a modular system you can expand, or a backup plan that pairs a right-sized battery with a generator for long outages. Incentive programs can change the math, but they vary widely by state and utility — check the solar rebates and incentives directory for your area before budgeting, and treat any program figure as something to confirm with the program itself, not as a promise.
What a battery cannot do
Honest limits, before you sign anything:
- It cannot run your whole home indefinitely. Runtime is finite, and every load you add shortens it.
- It cannot recharge without sun (or the grid). A multi-day outage with no sun drains any battery.
- It cannot start a motor bigger than its peak power rating, no matter how much energy it holds.
- It cannot pay for itself on backup value alone. Backup is insurance; daily-use value depends on your solar surplus and your rate structure, and no honest installer will guarantee a payback date.

Checklist
- List your critical loads — what you truly need during an outage, not everything in the house.
- Estimate each load’s daily kWh (watts × hours ÷ 1,000), or get an installer load audit.
- Multiply daily critical kWh by the days of backup you want — that is your usable-kWh target.
- Check continuous and peak power against your largest motor’s startup surge.
- Confirm the system is backup-capable, not self-consumption-only.
- Decide whether you also want daily self-consumption, and whether that changes the size.
- Compare usable capacity, not nameplate, across brands.
- Consider a modular system if you are unsure — expand later rather than oversizing now.
- Confirm your utility’s interconnection and backup rules before you commit.
- Have a licensed installer verify the final size against your panel, wiring, and largest loads.
Bottom line: Size the battery to your critical loads and the outage length you want to ride through, check power as well as energy, and leave room to grow. A right-sized battery is the one that keeps the fridge cold, the lights on, and the Wi-Fi up through the outages you actually get — without paying for capacity you will never use.
This is general information, not electrical advice. Battery sizing depends on your home’s loads, wiring, and utility rules — have a licensed installer verify the final system for your home.
Source link